|
'N' 25kV OLE
|
|
Modernisation Supports as installed on electrification renewals.
Click for GW OLE on Paddington to Cardiff line
Click for OLE on WCML
|
|
MODERNISATION CANTILEVER SUPPORTS 'N'
|
|
|
|
|
|
25601 1 track support Ladder leg 49mm high and lattice beam 54mm. 2 pk. £5.80
|
25602 2 track support Ladder leg 49mm high and lattice beam 65mm. 2 pk. £5.80
|
25603 1 track support Latice leg 52mm high and lattice beam 54mm. 2 pk. £5.80
|
|
|
|
|
|
25604 2 track support Ladder leg 52mm high and lattice beam 65mm. 2 pk. £5.80
|
|
|
|
TOP
|
|
25578 Light girder former 1/8inch square. £1.60
|
BENDING FORMER Portal beam and legs are one piece etches. The etch is rolled around the former, then the former is pulled out which leaves a four sided leg or girder. For information on FORMING GIRDER OR LEG click.
|
|
|
|
|
|
Register Arms and Support Pulleys for Cantilever Supports
|
|
Every type of register arm and support pulley can be seen hanging the wires, from early mk1 bridges approach register arms mounted above the beams to the lastest GWR register arms below.
|
|
|
|
|
|
25590 Register Arm extended. Etched n/s. 3 pack. £4.40.
|
25591 Register Arm tucked under. Etched n/s. 3 pack. £4.40.
|
|
|
|
|
|
|
25582 A Frame register arm, max height is 12.5mm. Etched n/s. 4 pack. £4.00.
|
25583 Upright support pulley, register arm hanging. Pulley is 4mm high. N/s etch. 6 pk. £5.50.
|
25585 Register arm hanging, support pulley hanging. Etched n/s. 6 of each. £5.50
|
|
TOP
|
|
For AWS ramps, speed signs, relay cabinets, colour light signals. See Line side 4.
|
)
)
)
)
)
)
)
)
)