Home page

Loco Kits in N

N Brass all loco, coach and wagon parts

GWR loco and coach fittings in N

Southern Railway loco fittings in N

LMS pre-group fittings in N

LMS fittings in N

LNER pre-group fittings in N

LNER fittings in N

BR loco fittings, general loco fittings, coach and wagon fittings.

Trams, narrow gauge, posters and timetalbles in N

Line side kits, fencing and signals in N

25 kV catenary supports and fittings in N

Rolling road for N gauge

Our contact details

LMS, LNWR Jumbo 2-4-0 2mm etches


Cauliflower 060 etches for 2mm



Two of the frets included in the kit showing most body parts.  Also included are frets for the chassis and tender.


Jumbo 2-4-0, Improved Precedent or small Jumbo 2-4-0, Whitworth.  LMS ex LNWR locomotive classes.


Introduced in 1887 to the design of F W Webb for the London and North Western Railway the Jumbo 2-4-0 were used on passenger services.  Highly regarded for their good performance they were in 1889 followed by the small Jumbo 2-4-0.  The difference between the two classes was in the wheel diameter 6' 9" for the Jumbo and 6' 3" for the small Jumbo.

Many of the two classes were taken over by the LMS.  Non passed into BR ownership.

Kit Details

Loco, chassis and body and tender, chassis and body etches for a Jumbo 2-4-0 and 2000 gallon tender.  For information on the tender see tender listing.

To build a model Jumbo further parts will be needed; wheels, motor, gears, paint, transfers and for a LNWR locomotive number plates.  The 2mm Association produces many parts which are suitable.

These etches have been reduced from a 4mm etch.  The links below go to a pdf copy of the 4mm etch instructions however there are places where the 4mm instructions will not work for the 2mm etch.  At these places the builder will need to use their own solutions.  The 2mm Association has publications and articles in their magazine which may be of help.  The Cauliflower assembly diagrams can be a help in identifying how the Jumbo etches go together.

Jumbo text instructions

Cauliflower diagrams


28741  Jumbo with 2000 gallon tender, body and chassis etches.  20.00.

N BRASS offers a set of parts for a LNWR Coal Tank.  Many of these are suitable for the Jumbo.





  For LNWR chimney, dome,  buffers, etc see  LMS Parts 1

Copyright (c) 2016 N Brass Locomotives. All rights reserved.